Supported Granular Finish
- Certificate of Approval: CA 3.185
- Technical Report: 16,370/24 – IBTeC (NR-06 Legal Compliance)
- Certified Protection Standards:🛡️ F.1.2 / F.1.8 / F.1.10: Approved for abrasive, scuffing, cutting, and piercing agents, chemical hazards, and moisture from water-based operations.
🔥 F.1.5: Approved for thermal agents (contact heat).
Product Description and Properties
Industrial PVC Glove Type B, featuring a 100% anti-allergic cotton textile support, green external PVC coating, and a non-slip granular finish with black nitrile granules on the palm and fingertips.
Provides protection against mechanical and chemical risks (acids, bases, peroxides, fuels, oils, greases, and paraffins) and contact heat. Recommended for handling larger, damp, or oily tools, as well as pneumatic or vibrating machinery (helps reduce vibration and hand tingling). Air and water-tight, featuring an anatomical design and thermal comfort in cold environments.
- References: 1526 (26 cm), 1535 (35 cm), 1545 (45 cm), and 1556 (56 cm).
- Sizes: 9½”(L) and 10½”(XL).
- Components and Accessories: None.
SECTORS, USES, AND APPLICATIONS
- Handling larger tools under VIBRATION, offering superior grip and protection, especially when hands are exposed to damp or oily surfaces.
- Handling vibrating, electric, or pneumatic tools, sanders, power saws, chainsaws, pneumatic hammers, chipping hammers, grinders, etc.
- Handling large damp or oily parts and equipment, such as metal sheets, pipes, or machinery.
- Operations in damp or oily environments.
- Construction and renovation jobs involving impacts and friction when using vibrating tools.
- Handling rough materials such as concrete, wood, or metal.
TARGET SEGMENTS
Oil & Gas | Petrochemical | Automotive | Steel Industry | Naval & Maritime | Civil Construction | Sanitation | Mining | Galvanizing & Surface Treatment | Machinery & Equipment Operations | Agribusiness | Metallurgy | Tanneries | Pest Control & Drain Cleaning Services, among others.
References and Lengths
Reference 1526: 26cm
Reference 1535: 35cm
Reference 1545: 45cm
Reference 1556: 56cm
Technical Standards
ISO 21420:2020+A1:2022
ABNT NBR ISO 374-1:2018
ISO 374-2:2019
BS EN 16523-1:2015+A1:2018 ISO 374-4:2019
EN 388:2016+A1:2018
EN 407:2020
Sizes
9½" (L)
10½" (XL)
Reusable
Follow the glove integrity and condition recommendations as outlined in the TECHNICAL MANUAL. If any punctures, tears, or material degradation are detected, discard the glove immediately, as its protective capacity is compromised.
Shelf Life
5 years from the date of shipment of the product, in accordance with the provisions of the Technical Manual.
Care and Cleaning
Should be prioritized for hand washing with mild detergent. Machine washing may cause the nitrile granules to detach from the structure. Water temperature for washing and rinsing must be a maximum of 30°C (86°F). Dry cleaning is prohibited.
Storage
The PVC compound withstands moisture, rain, sun, and temperature variations well; however, the nitrile rubber present on the palm requires significantly higher care compared to pure PVC, as it exhibits accelerated sensitivity to weathering. Keep strictly protected from heat and moisture sources in a clean and organized place.
Restrictions for Use
- Limited-use product. Read instructions before use.
- Check for tears, holes, or damage before donning. Replace the PPE immediately if defects are found.
- Not indicated for surgical and hospital procedures.
- Not indicated for use in high temperatures and electrical shocks.
- Not indicated for handling ketones, acetates, and aromatic solvents.
Innocuousness and Allergies: This PPE was manufactured with innocuous materials that, under normal conditions of use, do not release substances known to be toxic, carcinogenic, or mutagenic, ensuring the user's health and hygiene. There are no reports confirming allergic reactions resulting from PVC.
CA
3.185
Address
Rua Álvaro do Vale, 335 - Ipiranga São Paulo, SP 04217-010, BR
Contact