Supported Rough Finish
Certificate of Approval: CA 1.170
Technical Report: 16,379/24 – IBTeC (NR-06 Legal Compliance)
Certified Protection Standards:
🛡️ F.1.2 / F.1.8 / F.1.10: Approved for abrasive, scuffing, cutting, and piercing agents, chemical hazards, and moisture from water-based operations.
🔥 F.1.5: Approved for thermal agents (contact heat).
Product Description and Properties
Industrial PVC Glove Type B, featuring a 100% anti-allergic cotton textile support for enhanced comfort and sweat absorption. Green external PVC coating and a rough non-slip finish on the palm, back of the hand, and fingertips.
Provides protection against mechanical risks, chemical hazards (acids, bases, peroxides, fuels, oils, greases, and paraffin), and contact heat. Air and water-tight, featuring an anatomical design, basic thermal comfort in cold environments, and weather-resistant properties. [1]
References and Lengths: 1226 (26 cm), 1235 (35 cm), 1245 (45 cm), 1256 (56 cm), 1265 (65 cm), and 1270 (70 cm).
Sizes: 8½”(M), 9½”(L), and 10½”(XL).
There are no components or accessories for this glove.
SECTORS, USES, AND APPLICATIONS
Handling of acids, oils, greases, and solvents | fuel transportation and handling | machinery lubrication | handling of corrosive materials and abrasive elements | fiberglass operations | light and heavy-duty industrial cleaning | galvanizing and surface treatment | hydrocarbon transportation and refineries, among others.
TARGET SEGMENTS
- Chemical
- Petroleum & Petrochemical
- Refineries
- Biofuels
- Automotive
- Steel Industry
- Naval & Maritime
- Civil Construction
- Sanitation
- Waste Management
- Mining
- Galvanizing & Surface Treatment
- Fertilizer and Pesticide Production
- Machinery & Equipment Operations
- Agribusiness
- Metallurgy
- General Services
References and Lengths
Reference 1226: 26cm
Reference 1235: 35cm
Reference 1245: 45cm
Reference 1256: 56cm
Reference 1265: 65cm
Reference 1270: 70cm
Technical Standards
ISO 21420:2020+A1:2022
ABNT NBR ISO 374-1:2018
ISO 374-2:2019
BS EN 16523-:2015+A1:2018
ISO 374-4:2019
EN 407:2020
EN 388:2016+A1:2018
EN 407:2020
EN 388:2016+A1:2018
Sizes
8½" (M)
9½" (L)
10½" (XL)
Reusable
Follow the glove integrity and condition recommendations as outlined in the TECHNICAL MANUAL. If any punctures, tears, or material degradation are detected, discard the glove immediately, as its protective capacity is compromised.
Shelf Life
5 years from the date of shipment of the product, in accordance with the provisions of the Technical Manual.
Care and Cleaning
Can be hand washed or machine washed on a short cycle with mild detergent at up to 35°C (95°F). Dry cleaning, industrial washers, spinning, chlorine, or bleaches are prohibited. Line dry in the shade, hanging by the fingertips.
Storage
Keep in a clean and organized location. The PVC compound resists moisture, rain, sun, and temperature variations well.
Restrictions for Use
- Limited use product. Read the instructions before use.
- Check for tears, holes, or damage before donning. Replace the PPE immediately if defects are found.
- Not indicated for surgical and hospital procedures.
- Not indicated for use in high temperatures and electrical shocks.
- Not indicated for handling ketones and acetates.
Innocuousness and Allergies: This PPE was manufactured with innocuous materials that, under normal conditions of use, do not release substances known to be toxic, carcinogenic, or mutagenic, ensuring the user's health and hygiene. There are no reports proving allergic processes resulting from PVC.
CA
1.170
Address
Rua Álvaro do Vale, 335 - Ipiranga São Paulo, SP 04217-010, BR
Contact