Hexanol PVC Glove
Certificate of Approval: CA 1.169
Relatório Técnico: 16302-1/24 – IBTeC (NR-06 Legal Compliance)
Certified Protection Standards:
🛡️ F.1.2 / F.1.8 / F.1.10: Approved for abrasive, scuffing, cutting, and piercing agents, chemical hazards, and moisture from water-based operations.
Description and Indications of PPE
Protection against mechanical and chemical risks (acids, bases, peroxides, fuels, oils, greases, and paraffin). Air and water-tight, featuring an anatomical design and weather-resistant properties. Remains highly flexible in low temperatures down to -15ºC.
References & Lengths: 2126 (26 cm), 2135 (35 cm), 2145 (45 cm), and 2156 (56 cm).
Sizes: 8½”(M) and 9½”(L).
There are no components or accessories for this glove.
SECTORS, USES, AND APPLICATIONS
Fuel handling | machinery lubrication | handling of corrosive materials and abrasive, cutting, scuffing, and piercing elements | machinery and equipment operations | fertilizer and pesticide manufacturing | fiberglass production | light and heavy-duty industrial cleaning | chemical transportation | semiconductor manufacturing | alkaline battery manufacturing | production of artificial silk, synthetic fibers, and yarns, among others.
TARGET SEGMENTS
- Chemical
- Petroleum & Petrochemical
- Refineries
- Biofuels
- Automotive
- Steel Industry
- Naval & Maritime
- Civil Construction
- Sanitation
- Waste Management
- Mining
- Galvanizing & Surface Treatment
- Fertilizer and Pesticide Production
- Agribusiness
- Metallurgy
- Forestry
- General Services.
References and Lengths
Reference 2326: 26 cm
Reference 2335: 35 cm
Reference 2345: 45 cm
Reference 2356: 56 cm
Technical Standards
ISO 21420:2020+A1:2022
ABNT NBR ISO 374-1:2018
ISO 374-2:2019
BS EN16523-1:2015+A1:2018
ISO 374-4:2019
EN 388:2016+A1:2018
Sizes
8½" (M)
9½" (L)
Reusable
Subject to the glove's integrity and condition recommendations, as provided in the Technical Manual. In the event of punctures, tears, or any physical degradation of the material, the glove must be disposed of immediately, as its protective capacity is compromised.
Shelf Life
Up to 5 years (60 months) from the date of manufacture under the storage conditions recommended in the Manual.
Care and Cleaning
Hand wash with mild soap and water up to 40°C (104°F). The use of industrial washers, spinning, dry cleaning, chlorine, or bleaches is prohibited. Line dry in the shade, hanging by the fingertips.
Storage
The PVC compound resists moisture, rain, sun, and temperature variations well; however, the nitrile rubber on the palm requires much greater care than pure PVC, as it has accelerated sensitivity to weathering. Keep strictly protected from heat sources and moisture in a clean and organized place.
Limitations of Use
- Limited-use product. Read instructions before use.
- Check for tears, holes, or damage before donning. Replace the PPE immediately if defects are found.
- Not indicated for surgical and hospital procedures. Not indicated for use in high temperatures and electrical shocks.
- Not indicated for handling ketones, acetates, and aromatic solvents.
Innocuousness and Allergies: This PPE was manufactured with innocuous materials that, under normal conditions of use, do not release substances known to be toxic, carcinogenic, or mutagenic, ensuring the user's health and hygiene. There are no reports confirming allergic reactions resulting from PVC."Not indicated for handling ketones, acetates, and aromatic solvents.
CA 1.169
Disposal
Class I: Contaminated gloves must be packaged and disposed of as Hazardous Waste – Class I.
Address
Rua Álvaro do Vale, 335 - Ipiranga São Paulo, SP 04217-010, BR
Contact